Ericsson SVP 2000, Reference Manual, Page: 28 / 196

Installing the Equipment
Note: Do not remove the top cover of this equipment as doing so may invalidate
any warranties, cause a safety hazard and/or affect the EMC performance.
It may also invalidate any safety tests. Check with Ericsson Customer
Services beforehand.
2.2.2 Moving the Equipment Safely
Do not place this product on an unstable cart, stand, bracket, or
table. The product may fall, causing serious injury and serious
damage to the product. Use only with a cart, stand, bracket or table
recommended by Ericsson.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn. Do not move or carry the equipment whilst it is still
connected to the supply or other leads, is live, or is in operation.
2.3 Installing the Equipment
2.3.1 Fixing and Rack Mounting
The equipment is designed for fixed use only in a standard 19-inch rack. When
installed in a rack, it should be secured using the fixing brackets. Ensure it is firmly
and safely located and it has an adequate free-flow of air.
Slide the unit onto the chassis supports and affix to the rack by means of an M6 x
18 mm panhead screw in each corner.
A freestanding unit should be installed on a secure horizontal surface where it is
unlikely to be knocked or its connectors and leads disturbed.
2.3.2 Ventilation
Warnings!
Never push objects of any kind into the openings of the equipment as they may
touch dangerous voltage points or short out parts that could cause a fire or electric
shock.
Prevent spillage of any liquid on the product.
EN/LZT 790 0046/1 R1A 2-4