Ericsson SVP 2000, Reference Manual, Page: 68 / 196

Encoder Web-based GUI Control
Table 4.8 Network Tabbed Page Item Descriptions
Group Item Description Notes
Use DHCP Select the Use DHCP check box to
enable this function. The Dynamic Host Configuration
Protocol (DHCP) is a networking
protocol used on an IP network to
allocate IP addresses to computers.
This enables the IP address
configuration of a computer without a
network administrator.
An IP address is assigned to a
computer for a set interval (from a
range of assigned IP addresses
stored in a database), after which, the
computer must renew the IP address
or acquire a new one.
IP address
Netmask
Gateway
Preferred DNS Domain Name Space RFC 1035, RFC 1123, and RFC 2181
define the rules for forming domain
names
Adaptor 0
Default VLAN
Alternate DNS
Use VPN
connection Selecting the Use VPN connection
check box enables the VPN
connection
Server
address Address of the VPN server This can also be a host name if the
DNS is configured on the device. The
server must be reachable from one of
the Ethernet network
Login Login that the device will use to
connect to the VPN
Password Password that the device will use to
connect to the VPN Select the Show characters check box
to show the password as it is being
typed
Status Describes the current status of the
VPN connection
VPN Setup
Local address When the Status is "Connected",
"Local Address" describes the
current local address of the device
in the private network It is assigned by the VPN server and
cannot be changed from the device
EN/LZT 790 0046/1 R1A 4-22