Ericsson SVP 2000, Reference Manual, Page: 3 / 196

Contents
Contents
Chapter 1: Introduction
This chapter identifies the equipment covered by this manual; describes the purpose
of the equipment in a typical system; provides a summary of its main features;
identifies the controls, indicators and connectors in a guided tour of the front and
rear panels.
Chapter 2: Installing the Equipment
This chapter provides product specific installation information including rack
mounting, ventilation and pin-out details of the external connectors.
Chapter 3: Getting Started
This chapter provides a guide to powering up the unit, and setting up and using the
unit.
Chapter 4: SVP 2000 Encoder Web-based GUI Control
This chapter describes the configuration of the Encoder using the Web based GUI. It
includes descriptions of the GUI functions etc
Chapter 5: SVP 2000 Decoder Web-based GUI Control
This chapter describes the configuration of the Decoder using the Web based GUI.
It includes descriptions of the GUI functions etc
Chapter 6: Hardware Options, Software Licensing and Upgrades
This chapter provides details of options enabled via software licenses. It also gives
information regarding the Firmware Upgrade process.
Chapter 7: Preventive Maintenance and Troubleshooting
This chapter details routine maintenance tasks to be performed; provides general
servicing advice, and information regarding warranty and maintenance and any
appropriate Operator action to be taken; provides general fault-finding information
for other types of problem which may be encountered; and provides relevant
disposal information.
Annex A: Glossary
Annex B: Technical Specification
Annex C: Alarms List
EN/LZT 790 0046/1 R1A iii