Ericsson SVP 2000, Reference Manual, Page: 14 / 196

Introduction
- Supports uncompressed 8-bit/10-bit digital video capture
- The device is able to process uncompressed SDI video input(s).
- Audio: eight embedded PCM stereo audio channels

Transport Stream input is supported

Choice of DASH or RTP/UDP output data network protocols

Encodes up to five profiles

ABR Encoder based on MPEG-4 AVC compression

Storage capability for simultaneous high quality file capture (requires license
SVP2000/SWO/EN/FI-ST)

Simple Web-based user interface (Internet Explorer 10, Firefox, Chrome)

Text messaging available between Encoder and Decoder

GigE IP interface

1RU x 19” chassis with compact form factor

Optional SMPTE 2022-2 FEC support
1.2.1.3 SVP 2000 Decoder (SVP2000/BAS/RX)
The key elements for the Decoder are as follows:

Rebuilding the transport stream (DASH)
The Encoder builds a manifest file (called the Media Presentation Description)
The MPD is transmitted periodically to the Decoder to show the media ready for
transmission from the Encoder. Depending on the feedback from the Decoder,
an appropriately encoded file segment is requested and transmitted by the
Encoder. The stream of file chunks fetched by the Decoder consists of different
sizes i.e. bit rates.

The incoming files are collated by the Decoder and re-encoded into a video that
is sent out either as a Transport Stream or over the SDI.

The bit rate of the encoded video can be defined by feedback from the Decoder.

Supported modes are:
- MPEG-DASH To SDI
- RTP-TS To SDI
- MPEG-DASH To MPEG-TS (only if the SVP2000/SWO/RX/TSIP license is
enabled)
- RTP-TS To MPEG-TS (only if the SVP2000/SWO/RX/TSIP license is
enabled)

1 x SDI Output:
EN/LZT 790 0046/1 R1A 1-6