PPM3 MKII Programmer
- User Guide - V1.04 - 10
th
May 2008
48
2.11 ConsoleEDS – Command Line control
ConsoleEDS is a powerful software utility which allows any Equinox ISP Programmer to be controlled
from a custom Remote Application running under Windows.
The main features of ConsoleEDS are:
•
Allows an Equinox ISP Programmer to be remote controlled via simple Command Line
commands.
•
Suitable for interfacing to any application which executes under Windows
•
Simple Command Line interface makes even complex programming operations simple to
implement
•
Supports writing of a block of data from a file to the FLASH or EEPROM of a Target Chip
•
Supports reading of a block of data from the FLASH or EEPROM of the Target Chip to a file
on the PC hard disk
•
Supports uploading of pre-compiled standalone ‘Programming Projects’ to a target
programmer without requiring EQTools or the Project Upload Wizard.
•
Supports running of a specified ‘Programming Project’ which has already been uploaded into
the programmer ‘FLASH Memory Store’
•
Supports programming of the ‘Configuration Fuses’ of the Target Chip
•
Supports programming of the ‘Security Fuses’ of the Target Chip
•
Supports automatic generation of and programming of unique information such as serial
numbers and calibration data
•
Supports reading / writing of Atmel AVR on-chip Oscillator Calibration Byte
Please note:
Many of the above features are only accessible when using ‘ConsoleEDS PRO’.
Typical ConsoleEDS example:
ConsoleEDS BaseProject.prj /AUTOPROGRAM=MainFirmware
/EEPROMWRITE=CalData.hex,0,50
For further information about ConsoleEDS, please refer to Application Note 111.
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
