PPM3 MKII Programmer
- User Guide - V1.04 - 10
th
May 2008
32
2.5.6 Example of using EDS
Here is an example of how to use EDS:
•
Select
the
<FLASH>
tab
•
Click
the
<Load>
button to load a file
•
Click
the
<Check Sig>
button to check the Device Signature of the Target Chip
•
Click
the
<Write>
button to write the data in the Buffer Window to the Target Device
•
Click
the
<EEPROM>
tab to select operations on the EEPROM area of the Target Chip/
•
Click
the
<Fuses>
tab to read / write the Target Chip ‘Configuration Fuses’
•
Click
the
<Security>
tab to read / write the Target Chip ‘Security Options
For further instructions about how to use the EDS utility, please refer to the
‘EQTools – Getting
Started Guide’
which can be found on the CD-ROM supplied with the programmer.
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
