PPM3 MKII Programmer
- User Guide - V1.04 - 10
th
May 2008
46
2.8.4 Setting up a Programming Project for TTL Control Mode
When using ‘TTL Control Mode’, a single ‘Standalone Programming Project’ or set of ‘Chained
Projects’ must have already been uploaded to the programmer. This project must be have the ‘Project
Type’ set to ‘Standalone – Remote I/O Control’.
Please note:
It is not possible to control multiple Programming Projects using TTL mode as there is no method by
which to select the project to be executed. TTL mode is therefore limited to single project.
To create a TTL Mode control project:
•
Select
<Project Builder> <Create new project>
•
On
the
<Programmer and Project type>
screen, select:
o
Programmer:
PPM3-MK2
o
Project
type:
Standalone – Remote I/O Control
•
Set up the FLASH / EEPROM / Fuses / Security Fuses as normal
•
Compile the project
•
Upload to the programmer using the Upload Wizard
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
