PPM3 MKII Programmer - User Guide - V1.04 - 10
th
May 2008
3
1.3 I/O Connector Modules
1.3.1 Overview
Equinox has developed a range of plug-in user-replaceable ‘I/O Connector Modules’ which are
designed to interface the Equinox ‘PPM3 Programming Module’ to a variety of different Target
Systems. This interchangeable approach allows the required connection system to be tailored to a
particular Target System or Test Fixture without the requirement for unwiring the Test Fixture.
The required I/O Connector Modules simply plugs into the mating connectors at the end of the
programmer as detailed in the figure below.
Fig. 1.3.1 PPM3 – Inserting the I/O Connector Module
The currently available ‘I/O Connector Modules’ are as follows:
•
EQ-IOCON-1 (supplied as standard)
•
EQ-IOCON-2 (supplied as standard)
•
EQ-IOCON-3 (must be purchased separately)
•
EQ-CALCON (must be purchased separately)
Please refer to the separate manual ‘PPM3 – I/O Connector Modules’ for a full description of all the
available modules.
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
