PPM3 MKII Programmer - User Guide - V1.04 - 10
th
May 2008
5
1.3.4 Overview of I/O Connector Modules
There are currently four different I/O Connector Modules available as detailed in the table below:
Order Code
Description
EQ-IOCON-1
I/O Connector Module 1 (SPI) – Fast Connect Version
I/O connector module for In-System Programming (ISP) of Atmel microcontrollers
using SPI protocol (Fast Connect version)
This module plugs into the PPM3 and provides the relevant I/O connectors for SPI
programming of Atmel devices.
Features:
•
Plugs into suitable Equinox programmer eg. PPM3 Module
•
Atmel 10-way IDC ISP Header
•
Atmel 6-way IDC ISP Header
•
Equinox 10-way IDC ISP header
•
‘Fast Connect’ clip-in connectors for direct wiring to Test Fixture i.e wires
from bed-of-nails probe wires
•
Screw terminals for power connections
•
Target Vcc Status LED
•
Link to connect / isolate the programmer Vcc from the Target Vcc
EQ-IOCON-2
I/O Connector Module 2 (SPI) – Wire-wrap version
I/O connector module for In-System Programming (ISP) of Atmel microcontrollers
using SPI protocol (wire-wrap version)
Features:
•
Plugs into suitable Equinox programmer e.g. PPM3 Module
•
Atmel 10-way IDC ISP Header
•
Atmel 6-way IDC ISP Header
•
Equinox 10-way IDC ISP header
•
Single-in-line header with all programmer I/O brought out for wire-wrapping
to bed-of-nails probe wires
•
Screw terminals for power connections
•
Target Vcc Status LED
•
Link to connect / isolate the programmer Vcc from the Target Vcc
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...