PPM3 MKII Programmer
- User Guide - V1.04 - 10
th
May 2008
38
To program
another device.
7. Programming Project – FAIL
If the Programming Project fails for some reason:
•
The
<FAIL>
LED will FLASH
•
The programmer will automatically remove power from the Target System (if the programmer
is controlling power)
•
The LCD will display the relevant Error Message.
•
The List of possible Error Message can be found in the ‘Error Messages’ section of this
manual.
•
Press
the
<NO>
button to clear the Error Message
•
Press
<YES>
key to program another device. The programmer then goes back to step 3.
LCD Display
Buttons
Status LED
Display
ERROR
MESSAGE
Press
to clear the error
message.
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
