PPM3 MKII Programmer - User Guide - V1.04 - 10
th
May 2008
15
13 Atmel
ATtiny (AVR)
HV SPI (+12V
VPP)
ATtiny 11 / 12 / 15L
(including ‘L’ versions – Vcc must be +5V with
a +12V Vpp applied to the RESET pin)
HV ISP support for the ATtiny13, 25, 45 etc is
not currently available.
S
14 Atmel
(Temic)
T89C51 Rx2
AC2
Ix2
CC01
UART Boot
Loader
T89C51 RB2 / RC2 / RD2
T89C51 AC2
T89C51 IB2 / IC2
T89C51CC01
(Support for the AT89Cxxxx devices is not
currently available)
S
15 Atmel
AT24Cxxx
I2C
AT24C 01A / 01B / 11 / 02A / 02B / 04(A/B) /
08(A/B) / 16(A/B) / 32(A/C/SC) / 64(A/B) /
128(B/SC) / 256B / 512(B/SC) / 1024(B/SC)
U
16 Atmel
AT24HCxxx
I2C
AT24HC 02B / 04B
U
17 Atmel
AT34Cxxx I2C
AT34C
02C
U
18 Philips
P89C 51Rx2
66x
UART Boot
Loader
P89C51 RB2 / RC2 / RD2
P89C 660 / 662 / 664 / 668
S
19 Zensys
ZW series
LV SPI
ZW0102 / ZW0201 / ZW0301
S
Please note:
1. JTAG algorithms
•
The ATmega AVR JTAG programming algorithms require a chargeable ‘JTAG Upgrade
License’ to be purchased.
•
Firmware 3.07 or above should be used for JTAG programming.
2. 24Cxxx Serial EEPROM I2C algorithms
•
The 24Cxxx Serial EEPROM algorithms require a chargeable ‘24Cxxx Upgrade License’ to be
purchased.
•
For I2C programming of 24Cxxx Serial EEPROMs, please use firmware 3.07 or above.
Summary of Contents for PPM3 MK2
Page 1: ...User Guide...
