Epson Stylus Pro 10000 Series, Service Manual

Page: 50 / 323

EPSON Stylus Pro 10000/10000CF Revision B
Product Description Maintenance Mode 50
*1 When Standard paper is selected the following paper is selected as a result the of detection of
paper thickness.
0.2mm if the paper thickness sensor detects thin paper.
1.2mm if the paper thickness sensor detects thick paper.
*2 Paper thickness is inputted at first to print a pattern close to last setting, then it reduce
repetition of operation.
*3 It displays "PAT. PRINTING" during printing pattern.
1.7 Maintenance Mode
1.7.1 Outline
o
Startup
1. The maintenance mode display is selected by switching power ON while pressing the
Pause button.
o
Operation
1. The Setup items select mode is selected by pressing the Item button once. The first
Setup item on the Setup menu is displayed. The display is in the ’[Item]=[current setup
value]*’ format. The ’*’ represents the current setup value.
2. The Setup items are displayed in the ’[Item]=[current setup value]*’ format in turn
each time the Item button is pressed.
3. With the Setup items displayed, the settable values are displayed in turn in the
’[Item]=[current setup value](*)’ format each time the setup value + button or setup
value - button is pressed. The ’*’ is only displayed when the displayed setup value is
the current value. The values are displayed in reverse order by pressing the setup value
- button. If the setup value + button or setup value - button is pressed for more than the
set period of time, the setup values are displayed periodically in forward or reverse
order respectively. The cursor moves among column separated by “:“ character
(ie:”XX1=<nn>:<mm>”) if the cleaning button is pushed.
4. When the Enter button is pressed, the displayed setup value is entered and recorded as
the current setup value, and any associated operations are run. No operation occurs if
’*’ is already displayed.
5. When the Item button is pressed in the Setup item select mode, the system returns to
the maintenance mode.
Table 1-35. Gap Ajustment Menu
Display Messages Item Notes
PAPER THICK
STD
0.0~1.6mm
Select the thickness, to 0.1mm, of the paper you
are using to check the platen gap. Normally,
leave set to Standard.
ADJUST. PATT.
All
#1~12
Selects which patterns to print. (All patterns or
selected patterns only.)
#1 1~8~15
Bi-D adjust 1 (240cps, VSD1, Small)
#2 1~8~15
Bi-D adjust 2 (300cps, VSD2, Large)
C A U T I O N The following explanations regarding operating Panel service
functions are for service and support purposes only; do not share this
information with the user.