EPSON Stylus Pro 10000/10000CF
Revision A
Maintenance
General Maintenance Issues
278
6.1.1 Periodic Maintenance Items
The printer uses sensors and counters to determine when consumable items need to be
replaced. When a consumable part has reached its predetermined end-of-life according to
the corresponding counter, a message appears. See the table below for parts which require
periodic replacement.
6.1.2 Product Life Information
The information regarding the life of the main body / each system department / part in this
machine is shown in Table 6-2.
Table 6-1. Periodic Replacement Parts
Items
LCD Message
Description
Maintenance kit
Stylus Pro 10000/
10000CFC
“Maintenance Call 0100”
or
“Service Call 00000100
Time of display occurrence”
o
Solution
Replace the following parts with
theparts in the Maintenance Kit;
• Waste Ink Pads
• Cap Pump Assembly
• Flushing Box
• Dot missing detector
o
Enforcement necessary
adjustmen
Maintenance mode 2 of
• Waste Ink Counter Clear
• Cleaning Clear
Ink Tubes
CR Motor
“Service Call 00000101”
Time of display occurrence
o
Solution
Exchange the ink tube and CR motor.
o
Enforcement necessaryadjustmen
CR motor initialization of maintenance
mode 2
C A U T I O N
When replacing the waste ink pads, replace the pads in the waste ink
tank and not the whole tank. Put the old pads in a plastic bag and
throw away the used ink pads according to the laws and rules in your
area.
Table 6-2. Product Life Information
Items
Setting value
Notes
Error
Part life
20,000 pages / in 5 years
With B0 form
No
Print head
28 billion shot / in 5 years
Each nozzle
No
Maintenance kit
(Waste Ink Pads, Flushing
Box, Dot missing detector)
Waste Ink total of 660 g
B0 printing about 7000 sheets
Yes
CR Motor
Ink tube
2,300,000 passes
1 pass =1 round trip
*Ink tube life is monitored
based on this counter value.
Yes
PF Motor
21,000 meter
PF action distance as the
monitor
No
Cutter
About 2000 times (the film
system form in the case of
about 1000 times 1 sheet of
form cut to every 1 counting
1 sheet of form cut to every 1
counting
No
Summary of Contents for Stylus Pro 10000 Series
