EPSON Stylus Pro 10000/10000CF
Revision A
Disassembly & assembly
Disassembly Flow
134
3.
Disconnect the P/S self-containing fan connector connected to CN39 on the C362DRV
board.
Figure 4-42.
4.
Remove the four white screws (CPS:M3x8) securing the Power Board, and then
remove the Power Board.
Figure 4-43.
4.2.2.2 HJFK / Dummy Board Removal
(Any of the HJFK board or the Dummy board of the option are fixed.)
1.
Remove the rear cover as described in “Rear Cover Removal” (Paragraph 4.2.1.7.)
2.
Pull off the “Option block” to the upward.
Figure 4-44.
P/S Self-containing
Fan
Disconnect cable connector
Screw
Screw
Screw
Screw
Option block
HJFK / Dummy
board
Summary of Contents for Stylus Pro 10000 Series
