Epson Stylus Pro 10000 Series, Service Manual

Page: 157 / 323

EPSON Stylus Pro 10000/10000CF Revision A
Disassembly & assembly Disassembly Flow 157
17. Raising a few of the lower part of Head ASSY, then draws out it to the front lower
side.
Figure 4-99.
C A U T I O N Exchange the spring, in the case that the compression spring is caused
transformed.
C A U T I O N When disassemble / assemble the Head ASSY, pay attention in the
following point.
n
Do not touch and soil the surface of the head.
n
When assemble the head, the carriage is migrated to the left
side, while confirming the part that showed in the next figure
from the reverse side, fixed so as not to contact the surface of
the head in the head base.
n
When assemble the tube, confirm that the nut on the side of the
metal pipe is tightened firmly.
Head surface
Head base