EPSON Stylus Pro 10000/10000CF
Revision B
Product Description
Interfaces
35
* In/Out refers to the direction of signal flow from the printer’s point of view.
1.3.2 USB
Standard
:“Universal Serial Bus Specifications Revision 1.1”
“Universal Serial Bus Device Class Definition for Printing
Devices Version 1.1”
Bit rate
:12Mbps (Full speed device)
Data encoding
:NRZI
Adaptable connector
:USB series B
Suggested cable length
:2 meters
Figure 1-6. USB Pins
NOTE: To use USB interface: set “PARA.I/F=COMPAT.” in the Printer Settings
Menu.
Table 1-19. USB connector pin assignments and signals
Pin no.
Signal name
In/Out
Description
1
VCC
-
Cable power, max. power consumption is 100mA
2
-Data
bi-directional
data
3
+Data
bi-directional
data, pull up to+3.3V via 1.5K ohm resistor
4
Ground
-
Cable ground
Pin #2
Pin #1
Pin #4
Pin #3
Summary of Contents for Stylus Pro 10000 Series
