Epson Stylus Pro 10000 Series, Service Manual

Page: 236 / 323

EPSON Stylus Pro 10000/10000CF Revision B
Adjustment Self-Diagnostics 236
Figure 5-52.
o
If the ink cartridge is installed, print out the sample even if the ink charge is not
yet.
o
Press the "Enter" key during the message of "Authen.HeadRank?",you can check
the head rank on the print sample.
<Print sample for nozzle check pattern>
1. Check items:
o
Nozzle ink injection (missing / uncontinuation / wind line)
o
Satellite
o
Timing fence
o
Vertical direction nozzle lineup confirmation
o
Horizontal direction nozzle lineup confirmation
2. Printing method:
o
One pass with Bi-D at 180dpi resolution for PF and CR.
3. Pattern: Refer to following figure.
o
It prints in the order of Black/Cyan/Magenta/Yellow/Light Magenta/Light Cyan
from the left.
Print sample
Figure 5-53.
4.Version/ink remainder quantity
o
Version: T0xxxx.yyyy.zzzz
o
Ink Pad: 9.9
o
Head Rank: 6AT2A43 78Q3DN4 7,343,253
422E2VV 6K3FWWW EY3B7YX
TU U1YR TX UUTQ UX VUYX
3X05VVS XYWWVWS Y1YZXWV
W 45Y13 X 3L4E3 X 3Z2U3
5. Horizontal nozzle lineup confirmation
Item
Item
Item
SelecType
SelecType
SelecType
Nozzle Check End
Cleaning : Standard
Output Pattern
1
Press the [Enter] key to select
the [A13 slant adjustment].
Press the [Pause] key to select
the [Nozzle check].
Press the [Enter] key to cleaning.
Press the [Pause] key to select
the [Nozzle check].
Press the [Enter] key to output
the pattern.
Press the [Pause] key to select
the [Nozzle check].