manualshive.com logo in svg

Epson Equity IIe, User Manual

The Epson Equity IIe, a popular vintage computer system, comes with a comprehensive Product Information Manual that covers all necessary details. This valuable manual can be downloaded for free from manualshive.com, allowing users to easily access and benefit from the wealth of information it provides.

Share
Download
background image

5. Many application programs (such as word processors) must

be set up properly before they can use a printer. Check your
program manual to see what customization is required.

6. Try running the Parallel Port (Printer Interface) Check if

you have a parallel printer, or the Serial Port (RS-232C)
Check if you have a serial printer. Appendix C describes

these diagnostics checks. If the diagnostics test indicates an
error, contact the place where you bought the printer.

Option Card Problems

If you install an option card and it is not functioning properly,
check the following:

1. Is the option card installed correctly? Check the installation

procedure described in Chapter 5 and also see the
instructions that come with the option card. The most
common problem with option cards is a loose connection.
Make sure the option card is well-seated in its slot.

2. Did you set the necessary DIP switches or jumpers on the

option card? See your option card manual for instructions.

3. Did you run the Setup program to redefine your computer’s

configuration after installing the card? See Chapter 2.

4. If you installed a memory card in your computer, see “Post-

installation Setup for Memory Cards” in Chapter 5.

5. If you used the option card to add an external device to your

computer, did you use the proper cable to connect the
device to the option card connector on the back panel?

6. Did you perform the correct setup procedures for the

software you are using with the option card? If necessary, see
your software manual for instructions on running the
software setup procedure.

A-16 Troubleshooting

Summary of Contents for Equity IIe





















































































































































































































































































Reviews:

No comments

Related manuals for Equity IIe

Gateway MX6708 Hardware Reference Manual preview
MX6708
Brand: Gateway Pages: 72
Elo TouchSystems EloView Engine Quick Installation Manual preview
EloView Engine
Brand: Elo TouchSystems Pages: 2
IBM IntelliStation M Pro Type 6868 User Manual preview
IntelliStation M Pro Type 6868
Brand: IBM Pages: 188
Steinberg HALion Sonic 2 Operation Manual preview
HALion Sonic 2
Brand: Steinberg Pages: 820
ESTERS ELEKTRONIK GDR 1501 Series Instruction Manual preview
GDR 1501 Series
Brand: ESTERS ELEKTRONIK Pages: 17
Commodore Amiga A4000 User Manual preview
Amiga A4000
Brand: Commodore Pages: 31
Jupiter H310 Quick Installation Manual preview
H310
Brand: Jupiter Pages: 2
Stanley STST98182-1 User Manual preview
STST98182-1
Brand: Stanley Pages: 23
Conrad Minix Neo X5 Quick Start Manual preview
Minix Neo X5
Brand: Conrad Pages: 4
Novus NMS CLIENT 3-T-II Startup Manual preview
NMS CLIENT 3-T-II
Brand: Novus Pages: 60
Rikomagic MK802 IIIS User Manual preview
MK802 IIIS
Brand: Rikomagic Pages: 27
EVOC 104-1816CL2NA User Manual preview
104-1816CL2NA
Brand: EVOC Pages: 101
Shuttle DH410100.102 User Manual preview
DH410100.102
Brand: Shuttle Pages: 24
Retro Games THEC64 User Manual preview
THEC64
Brand: Retro Games Pages: 114
Cubix HostEngine 4U User Manual preview
HostEngine 4U
Brand: Cubix Pages: 8
Acer Iconia One 10 User Manual preview
Iconia One 10
Brand: Acer Pages: 55
Rise RS-4702 User Manual preview
RS-4702
Brand: Rise Pages: 31
North Bayou FC35 Instruction Manual preview
FC35
Brand: North Bayou Pages: 2

Brands by name

Popular brands

Load more brands