Epson Equity IIe, User Manual

Page: 51 / 276

If this does not work, try loading the program at 8 MHz and
then switch to 12 MHz to run it, Do not enable the Auto
speed function.
Follow these steps to change the Auto speed setting:
1. At the main Setup menu, highlight and
press
Enter.
The current status appears:
** **
If the displayed setting is correct, press to return to the
main Setup menu.
2. To change the setting from to or
vice versa, press
Enter.
3. Highlight * * and press
Enter
to return to the main Setup menu.
Changing the Math Coprocessor Setting
If you have not installed an 80287 math coprocessor in your
Equity IIe, you can skip this section.
If you have installed a math coprocessor, you need to change
the coprocessor setting. Follow these steps:
1. At the main Setup menu, highlight and
press
Enter.
The current setting appears:
***** *****
Running the Setup Program 2-15