Home
/
Epson
/
Equity IIe
/
User Manual

Epson Equity IIe, User Manual, Page: 130 / 276

Share

Page: 130 / 276

Epson Equity IIe User Manual Download Page 130

2. At the MS-DOS command prompt, type

and press

Enter.

You see this main menu:

3. To select an option, use the arrow keys to highlight the

option you want and press

Enter.

Most options contain

submenus; keep highlighting your selection and pressing

Enter

until you select the desired operation.

Because MENU works by calling external commands, you may
see an error message similar to this when you select an option:

BACKUP.COM

The message appears if you do not have a hard disk and the
diskette in the current drive does not contain the command

called by MENU-in this case, BACKUP.COM. Insert the
diskette that contains the command you selected into drive A
and try again. (To see which commands are on which MS-DOS
diskettes, refer to the list of your working diskette contents in
the MS-DOS Installation Guide.)

If you find that you often have to swap diskettes when you
use MENU, see the description of MENU in your MS-DOS

Reference

Manual for some recommended solutions.

4-40

Using MS-DOS with Your

Equity IIe

«
...
128
129
130
131
132
...
»

Summary of Contents for Equity IIe





















































































































































































































































































Reviews:

No comments