Epson Equity IIe, User Manual

Page: 58 / 276

PgUp
decreases the drive type number in
increments of 10 (for example, from 47
to
37)
Home
enters drive type 1 (the first available drive
type)
End
enters drive type 63 (the last available drive
type)
This is a handy way to verify new hard disk settings
before you press
Enter
because the settings list is
automatically updated as you display each new type
number.
After you enter the appropriate drive type number, press
Enter.
The screen displays the new drive type number and
hard disk settings. Go to step 8.
7. If the configuration of the hard disk you are installing does
not match one of the drive types listed in Appendix E,
highlight
and press
Enter. You
see the
following:
cylinders 980
The same parameter is highlighted on the submenu above.
Enter the correct number of cylinders (tracks) for the disk
and press
Enter.
The information for
is automatically updated on the submenu
above and you see the next parameter, Number
Enter the correct number of read/write heads for
the hard disk and press
Enter.
Follow this same procedure for each remaining item in the
settings list (the number of sectors, the precompensation
cylinder, and the landing zone).
2-22 Running Setup Program