Epson Equity IIe, User Manual

Page: 53 / 276

If the time and date are incorrect, go to step 2 below.
If the time and date have never been set, the submenu
contains a template for you to fill in:
Go to step 2 to enter the time and date.
2.
Press
Enter
to move the cursor block into the submenu.
3. To set or change the time, press
Enter
again. You see this
prompt:
4. Using a 24-hour time period, enter the time in the exact
format shown in the box. Type two digits for each part; the
Setup program automatically inserts the colons (:). For
example, to set the time to 1:30 p.m., you would type the
following:
1 3 3 0 0 0
You can use the backspace key to make corrections.
If you enter an invalid time-for example, a number greater
than 23 for the hours or greater than 59 for the minutes or
seconds-the computer beeps and ignores your entry. Try
again.
When the time is correct, press
Enter.
Running
the Setup Program
2-17