Epson Equity IIe, User Manual, Page: 54 / 276

5. To set or change the date, highlight and press
Enter.
You see this prompt:
6. Enter the date in the exact format shown in the box. Use
two digits for the month and day and four digits for the year;
the Setup program automatically inserts the dashes. For
example, to set the date for December 30, 1989, you would
type the following:
1 2 3 0 1 9 8 9
You can use the backspace key to make corrections.
If you enter an invalid date-for example, a number greater
than 12 for the month or greater than the number of days in
that month-the computer beeps and ignores your entry.
Try again.
When the date is correct, press
Enter.
7. Check the new time and date to be sure they are correct.
Then press to return to the main Setup menu.
The Setup program automatically saves the time and date
when you press Enter after typing each one, If you
change the time or date and then exit the Setup program
without
saving your changes, the new time and date still
take effect.
2-18
Running Setup Program