manualshive.com logo in svg

Epson Equity IIe, User Manual, Page: 260 / 276

Share
Download
Epson Equity IIe User Manual Download Page 260

MGA

Multi-graphics Adapter. A type of display adapter card that can
display monochrome text and color graphics on the screen.

Microprocessor

A small version of a CPU contained on one semiconductor
chip.

Modem

A device that allows a computer to transmit signals over
telephone lines so it can send and receive data. Modem stands
for MOdulator/DEModulator.

Monitor

The piece of hardware that contains the screen and displays

information.

Monochrome monitor

A monitor that displays in only one color, such as green or
amber, as opposed to a color monitor which can display in
several colors.

Mouse

A hand-held pointing device with one or more buttons. When
you slide the mouse over a flat surface in a certain direction, the
cursor moves in the same direction on the screen.

MS-DOS

Microsoft Disk Operating System. The operating system that
comes with your computer. See Operating system.

Glossary

13

Summary of Contents for Equity IIe





















































































































































































































































































Reviews:

No comments