Epson Equity IIe, User Manual

Page: 56 / 276

2.
To select press
Enter. You
see a
menu such as the following:
Drive 1:
Type 59
Number of cylinders 980
Number of heads 5
Number of sectors 17
Precomp. cylinder None
Landing zone 979
Total capacity (MB) 40.7
Drive 2: None
The submenu lists the settings you can change for each
drive: the number of cylinders (tracks), the number of read/
write heads, the number of sectors, the precompensation
cylinder, the landing zone (the cylinder on which you want
to park the heads when moving the computer), and the
total storage capacity in megabytes.
3. If you want to change the settings for Drive 1 (which is
drive C on most computers), press
Enter
to highlight
1 :. If you want to change the settings for
Drive 2, press
Enter
and then to highlight
4.
Press
Enter.
You see this submenu:
5. If you want to change the drive type and the configuration
of the hard disk you are installing matches one of the drive
types listed in Appendix E, go to step 6.
2-20 Running the Setup Program