Epson Equity IIe, User Manual

Page: 59 / 276

If you enter a parameter incorrectly, press or to
highlight the parameter and then enter it again.
The Setup program does not allow you to enter the total
storage capacity; it calculates the storage capacity for you,
based on what you enter for the number of cylinders, heads,
and sectors.
After you type the landing zone number and press
Enter,
the cursor block returns to the Drive submenu heading.
8. If you want to change the hard disk settings for drive 2,
press and return to step 4.
9. When the hard disk drive settings are correct, press to
move the cursor block into the top submenu. Highlight
**
* * and press
Enter
to save your
hard disk drive configuration. The main Setup menu
appears.
Setting the Diskette Drive Type(s)
Your Equity IIe comes with one factory-installed diskette drive.
If you removed the installed drive or added a second diskette
drive, you need to change the diskette drive settings to match
your configuration. If you haven’t made any changes, you can
verify the drive type settings. Follow these steps:
1. At the main Setup menu, highlight
The current settings appear:
Running the Setup Program
2-23