manualshive.com logo in svg

Epson Equity IIe, User Manual

The Epson Equity IIe, a popular vintage computer system, comes with a comprehensive Product Information Manual that covers all necessary details. This valuable manual can be downloaded for free from manualshive.com, allowing users to easily access and benefit from the wealth of information it provides.

Share
Download
background image

When you continue the test, the program checks that the
printer is responding correctly. This test detects whether the
printer is offline or whether an interface error exists. If no errors
occur, the computer sends a repeating sequence of ASCII
characters and bit-image data to the printer until you press any
key. The pattern looks like this:

The text data includes all the characters commonly used by
programs that require foreign languages or graphic characters.

If your printer prints different characters than you see in the
illustration, you may need to be careful with certain software.

The bit-image data is sent to the printer using a command

(ESC K) compatible with Epson and IBM printers.

Even 

if the test runs only for a short time, 

your printer may

store many characters in 

its buffer. To stop printing, turn the

printer offline.

C-32

Performing System Diagnostics

Summary of Contents for Equity IIe





















































































































































































































































































Reviews:

No comments

Related manuals for Equity IIe

IBM 610 Manual Of Operation preview
610
Brand: IBM Pages: 66
Vector Graphic System 2800 User Manual preview
System 2800
Brand: Vector Graphic Pages: 40
Biostar IDEQ 200T User Manual preview
IDEQ 200T
Brand: Biostar Pages: 60
Hegener+Glaser Mephisto Polgar Instructions Manual preview
Mephisto Polgar
Brand: Hegener+Glaser Pages: 19
Scientific Development Corporation Minivac 601 Getting Acquainted preview
Minivac 601
Brand: Scientific Development Corporation Pages: 36
Rikomagic MK802 IIIS User Manual preview
MK802 IIIS
Brand: Rikomagic Pages: 27
EverFocus eIVP-CML-AI-D0000 User Manual preview
eIVP-CML-AI-D0000
Brand: EverFocus Pages: 19
AMSTRAD CPC464 User Manual preview
CPC464
Brand: AMSTRAD Pages: 249
Seagate ST9250317AS - Momentus 5400 FDE 250 GB Hard Drive Manual preview
ST9250317AS - Momentus 5400 FDE 250 GB Hard Drive
Brand: Seagate Pages: 5
HACH LANGE TitraLab KF1121 Basic User Manual preview
TitraLab KF1121
Brand: HACH LANGE Pages: 432
Rise RS-4702 User Manual preview
RS-4702
Brand: Rise Pages: 31
National Instruments VXIpc-745-100 User Manual preview
VXIpc-745-100
Brand: National Instruments Pages: 81
YOGGIE GATEKEEPER PICO User Manual preview
GATEKEEPER PICO
Brand: YOGGIE Pages: 71
IRIS 3010 User Manual preview
3010
Brand: IRIS Pages: 145
IBM Aptiva 2187 Service Manual preview
Aptiva 2187
Brand: IBM Pages: 161
Teasung TZ 490BG03 Manual preview
TZ 490BG03
Brand: Teasung Pages: 8
NEC POWERMATE VE - SERVICE 1997 Service Manual preview
POWERMATE VE - SERVICE 1997
Brand: NEC Pages: 22
Dell Dimension L Series Reference And Troubleshooting Manual preview
Dimension L Series
Brand: Dell Pages: 162

Brands by name

Popular brands

Load more brands