background image

Cubix Corporation 

 2800 Lockheed Way 

 Carson City, NV 89706-0719 

 Page 1 

Sales 800.829.0550 

 

http://www.cubix.com

 

 [email protected] 

 host-engine-4u-x10drg-q-20151211 

HostEngine 4U Host 
Computer User Guide 

 

HostEngine 4U computer features Intel® Xeon

®

 E5-2600v3 Series (Haswell) dual-processors 

with the Intel C612 chipset. HostEngine 4U provides four PCI Express (PCIe) Gen 3.0 x16 
expansion slots. Each slot accommodates a full-height, full-length, double-wide GPU or a half-
height, half-length controller such as the Cubix Host Interface Controller (HIC) that connects to 
Cubix Xpander products. Each HIC connects to multiple slots within an Xpander Rackmount 8 
or other Xpander products. 
 
By connecting HostEngine to GPU-Xpander Rackmount 8, you can add eight double-wide 
GPUs such as NVIDIA® Quadro M5000 or M6000 to the HostEngine 4U computer for running 
Autodesk® 3ds Max or Bunkspeed® Shot with NVIDIA iray running on Linux or Microsoft® 
Windows®. You can also run BlackMagic Design® DaVinci Resolve® for Linux on HostEngine 
4U computer. Connecting to Xpander Rackmount 8 also enables you to connect to GPU 
Compute Engines such as NVIDIA or AMD GPUs for HPC applications, virtual desktop projects 
or multiple Intel Xeon Phi coprocessors for parallel processing. 

 
 

 

Summary of Contents for HostEngine 4U









Reviews: