Messages
Cause/What to do
Setup failed.
Cause:
Cannot finish the configuration because the communication between the printer
and computer failed or the file cannot be read by some errors.
What to do:
After checking the specified file and communication, import the file again.
Related Information
&
“About Digital Certification” on page 358
Delete a CA-signed Certificate by Mistake
There is no backup file for the CA-signed certificate.
If you have the backup file, import the certificate again.
If you obtain a certificate using a CSR created from Web Config, you cannot import a deleted certificate again.
Create a CSR and obtain a new certificate.
Related Information
&
“Importing a CA-signed Certificate” on page 360
&
“Deleting a CA-signed Certificate” on page 361
>
>
Solving Problems for Advanced Security
368
Summary of Contents for C11CH68401
Page 17: ...Part Names and Functions Front 18 Inside 20 Rear 21 ...
Page 29: ...Loading Paper Paper Handling Precautions 30 Paper Size and Type Settings 30 Loading Paper 31 ...
Page 34: ...Placing Originals Placing Originals 35 Originals that are not Supported by the ADF 36 ...
Page 369: ...Where to Get Help Technical Support Web Site 370 Contacting Epson Support 370 ...