Emerson Daniel 3814, Installation Manual

Page: 27 / 110

— Explosive Atmospheres (ATEX)
— International Electro-technical Commission (IECEx)
— Pressure Equipment Directive (PED via BSI)
— Electromagnetic Compatibility (EMC)
— International Organization of Legal Metrology (OIML)
Approval Agencies
• UL
• ULC
• DEMKO
• INMETRO
• NEPSI
• GOSTR
Important
Please consult Daniel for a complete metrology approvals list.
1.11 FCC compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
NOTICE
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
1.12 References
1 Gould Modbus Protocol Reference Guide, Rev. B, PI-MBUS-300
2 API MPMS Chapter 5.8, Section 8-Measurement of Liquid Hydrocarbons
by Ultrasonic Flow Meters Using Transit Time Technology, Edition: 2nd
American Petroleum Institute / 01-Nov- 2011
3 API MPMS Chapter 4.2, Displacement Provers, 3rd Edition | September
2003 | Reaffirmed: March 2011
Installation manual Introduction
3-9000-760 May 2019
Installation manual 27