Emerson Daniel 3814, Installation Manual

Page: 43 / 110

Obtain safety engineered swivel hoist rings
A list of approved manufacturers of safety engineered hoist rings is below:
• American Drill Bushing Company ( www.americandrillbushing.com )
• Carr Lane Manufacturing Company ( www.carrlane.com )
Select an approved supplier from the list below. These vendors can supply the
safetyengineered hoist rings. This is not intended to be a complete list.
• Fastenal ( www.fastenal.com )
• Reid Supply ( http://www.reidsupply.com )
The appropriate hoist rings can also be purchased directly from Daniel. The following table
provides part number for reference:
Table 2-2: Hoist ring part number lookup table
Daniel part number
(1)
Hoist ring thread size
& load rating
(1)
American Drill
Bushing Co. P/N
(1)
Carr Lane
Manufacturing Co.
P/N
(1)
1-504-90-091 3/8"-16UNC, 1000 lb 23053 CL-1000-SHR-1
1-504-90-092 1/2"-13UNC, 2500 lb 23301 CL-23301-SHR-1
1-504-90-093 3/4"-10UNC, 5000 lb 23007 CL-5000-SHR-1
1-504-90-094 1"-8UNC, 10000 lb 23105 CL-10000-SHR-1
1-504-90-095 1-1/2"-6UNC, 24000 lb 23202 CL-24000-SHR-1
(1) The part numbers include only one hoist ring. Two hoist rings are required per meter.
Size needed for engineered swivel hoist ring
To determine the size of the hoist rings required for your meter, use the table below for
the 3814 Liquid Ultrasonic Meter. The part number shown in
Table 2-3 is appropriately
rated for the ANSI rating of your meter.
Table 2-3: Hoist ring lookup table for Daniel 3814 Liquid Ultrasonic Flow Meters
ANSI 300 ANSI 600 ANSI 900 ANSI 1500 Daniel Part
Number
4” to 10” 4” to 8” 4” to 8” 4” to 6” 1-504-90-091
12” to 18” 10” to 16” 10” to 12” 8” to 10” 1-504-90-092
20” to 24” 18” to 20” 16” to 20” 12” 1-504-90-093
30” to 36” 24” to 30” 24” 16” to 20” 1-504-90-094
36” 30” to 36” 24” to 36” 1-504-90-095
Note
4” to 6” 45 degree meters and 8” to 36” 60 degree meters
Installation manual Mechanical Installation
3-9000-760 May 2019
Installation manual 43