Emerson Daniel 3814, Installation Manual

Page: 91 / 110

• Diagram Page 2 -
Configure
→
Manual Setup
(continued) and
Alerts Setup
• Diagram Page 3 - Service Tools
→
Alerts and Variables
• Diagram Page 4 - Service Tools
→
Variables (continued), Service Tools
→
Trends
, and
Service Tools
→
Maintenance
10. If you encounter problems, refer to the contact information on the back cover of
this manual or the contacts included in the Field Communicator Users Manual.
4.4 Security seals for the meter
For the integrity of the meter metrology and to prevent tampering with the transmitter
electronics and transducer assemblies, attach security latches on the end caps and install
security wires on the Transmitter Electronics Enclosure end caps, the Bracket/Cover cap
head screws. See
Sealing the Transmitter Electronics Enclosure and Base enclosure
security seals .
Seal the conduit ports with sealing compound according to the customer’s requirements
(e.g., after approximately one to two weeks of run time). Also, see
Section 3.4.1 .
Installation manual Configuration
3-9000-760 May 2019
Installation manual 91