Emerson Daniel 3814, Installation Manual

Page: 71 / 110

Content set for Current output 1. If a second current output is available, the
Secondary variable is set to match the Content set for Current output 1)
Identification and HART
®
units (volume units, Flow rate time units, Velocity units,
Pressure and Temperature units).
Click
Next to continue to the Temperature and Pressure page.
8. Set the temperature and pressure scaling for analog inputs, enter fixed values, and
set alarm limits for both. The alarm limit selections are hold last output value or use
fixed value..
• Live temperature selections include minimum and maximum inputs or fixed
temperature.
• Live pressure selections include minimum and maximum inputs, gage
(atmospheric pressure), absolute, or fixed pressure. Click
Next to continue to
the Local Display page, if View local display setup was selected on the Startup
page.
4.1.2 Display items
The valid labels, descriptions and units for the display items are shown below:
Table 4-1: Local display labels, descriptions and valid units
Local Display labels, descriptions and units
QFLOW — Uncorrected volume flow rate
• BBL – Barrels
• GAL – Gallons
• L – Liters
• CM – Cubic Meters
• MCM – Thousand Cubic Meters
TDYVL — Current day’s forward uncorrected volume
• +BBL – Barrels
• +GAL – Gallons
• +L – Liters
• +CM – Cubic Meters
• +MCM – Thousand Cubic Meters
TDYVL — Current day’s reverse uncorrected volume
• -BBL – Barrels
• -GAL – Gallons
• -L – Liters
• -CM – Cubic Meters
• -MCM – Thousand Cubic Meters
Installation manual Configuration
3-9000-760 May 2019
Installation manual 71