Emerson Daniel 3814, Installation Manual

Page: 89 / 110

remains latched until acknowledged. Click
Ack
(acknowledge) to clear the
alarm.
4.3 Using a Field Communicator to configure the
meter
Important
Follow all guidelines and precautions described in the Field Communicator User Manual
and in the 3814 Liquid Ultrasonic Flow Meter documentation when working in a hazardous
area.
Prerequisites
• Emerson Field Communicator software, license, installation guide and user manual
available on the One Emerson website:
http://www.emerson.com/en-us/catalog/
ams-475-field-communicator
• Daniel HART Device Description (HART DD) installed for the meter
• Network configured for a Field Communicator
• 475 Field Communicator User's Manual available on the One Emerson website: https://
www.emerson.com/documents/automation/manuals-guides-user-s-manual-ams-
en-104978.pdf
• System wiring diagram drawing number DMC-004936 (see Appendix A )
• Power supply
Procedure
1. Remove electrical power to the meter. If installed, remove the endcap security
latches and seals and then, remove the endcap.
2. Refer to the Field Communicator Users Manual wiring diagrams and commissioning
instructions provided with your handheld device. Register the product to activate
the end user license.
3. Fully charge the Field Communicator battery prior to use.
Important
Do not change the battery in a hazardous area environment. The power supply is
not intrinsically safe.
4. On the meter, run the wires through the field wiring conduit and into the
transmitter electronics enclosure.
Installation manual Configuration
3-9000-760 May 2019
Installation manual 89