Emerson Daniel 3814, Installation Manual

Page: 80 / 110

6. On the
Overview
page, click
Alert Setup
and select the
Flow Analysis
tab and
enable Reverse Flow. Click the OK button to return to the Overview page.
7. On the Overview page, click the Service Tools tab and select the Variables tab. The
Flow Data, Path Information, Flow Totals, and All Variables data is populated after
you are connected to the meter.
a) Click the Flow Data tab and view the Flow Direction (Forward or Reverse),
Average Flow and Average Sound Velocities values.
b) Click the Path Information tab and view the Chord performance, Gain, SNR
(Signal to Noise Ratio) Signal strength (mV), and Noise (mV).
c) Click the Flow Totals tab to view the volume totals (forward and reverse
uncorrected volume).
d) Click the
All Variables
tab to view a graphical display of the Primary,
Secondary, Third and Fourth Variables.
Figure 4-7: AMS Device Manager - Service Tools All Variables status
indicators
8. Click OK to return to the Overview page.
9. Enable the Write Protect switch on the CPU Module to protect the meter’s
configuration.
10. From the Overview window, click Display Meter K-Factors . K-Factors are a read-
only values calculated from the Full scale volumetric flow rate used with frequency
outputs and the Maximum frequency for frequency output.
Configuration Installation manual
May 2019 3-9000-760
80 3814 Liquid Ultrasonic Flow Meter