71
Installation
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Preparing for installation
The lid cover is only attached by a hinge. Take care not to lose it.
To take off the front plate, remove the
screws beneath the lid.
Push the upper section of the housing
(frame with display) up a little and lift
it off.
Caution: The display is connected
with a flat-ribbon cable to the cir-
cuit board in the concealed box.
Loosen the plug so that the upper
section can be removed.
The lower section of the housing to-
gether with the wall-mounting plate is
attached to the concealed box with 3
screws: Loosen the screws and take
off the lower part.
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
