27
Automatic settings
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Alarm functions
Alarm functions are used for awnings in manual and in automatic mode.
During
frost, wind or rain alarm
the awnings are retracted and cannot be manually
extended.
Shade settings
The settings are only executed if an awning is in automatic mode and none of the alarm
functions named above is active.
Highest priority is assigned to the
outdoor temperature-block
, followed by the
in-
door temperature-block
(retract).
Only when the direction and height of the sun agree and there is no active block is the
automatic shading by light intensity
engaged.
Setting of the automatic
The automatic awning functions can be accessed by pressing the buttons:
Now you can select individual awnings and adjust their settings. For each awning the
following settings can be changed:
Press the button to set the brightness above which the awning will be deployed to offer
shade.
Adjust value: Use the arrow buttons to change the value as you wish.
Default setting: 40 kLux.
7.2. Units for sun and wind
Remain retracted: If the awning should not react to the brightness, select
Never
. The
awning will then remain retracted unless it is manually operated.
Confirm your setting with the
OK
button.
For the automatic system to react, the set light intensity value must be exceeded or un-
dercut for the duration of the delay times. This prevents constant extensions and re-
traction of the awning during rapid-changing light conditions. The movement delays
can be adjusted.
System > Automatic Settings > General Settings > Movement Delays
3.3. Adjust movement delays (shading elements)
Automatic
Settings
Awning
System
Intensity
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
