87
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Delete wireless connection
Press
Delete
if you want to delete the connection to a wireless participant. All wireless
participants available are shown:
Select the wireless participant to be deleted. Confirm the question “Really delete wire-
less connection to member XX?” with
Yes.
The wireless connection is deleted.
6.2.3. Indoor sensor for weather display
In the weather data display, the values from a sensor (e.g. internal sensor of WS1 Color
or wireless sensor WGTH-UP) can be displays. Wireless sensors have to be taught in
to the control first.
Select the desired sensor here. Press the buttons:
Press the button to reach the selection menu with the sensors. Then press the button
of the desired sensor and confirm using the
OK
button.
6.2.4. Settings for communication with KNX
To set up the data exchange with the KNX system, please use the ETS software.
8. Basic setting in the ETS
RF-MSG status
Display of Serial number, version and RF-Router if
applicable
Other settings
Basic settings of drive, seting of movement times, MSG
control.
6.1. Set up drives and drive groups, page 94
(MSG control and zero position movement time/dead
time can be set as of RF-MSG version 3.4)
Delete
WGTH
Remo 8
RF Relay
RF MSG
WL-Z
WL400/800
Installation
Weather Display
System
Sensor Selection
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
