93
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Press the button next to Summertime Rule to set the automatic switch-over. Depend-
ing on location, select
Europe
,
USA
,
None
(if no summertime switch-over shall take
place) or
User-defined
(if the switching shall be set individually).
Confirm your setting with the
OK
button.
Enter location
The location must be specified if the control receives weather data via the bus.
The information about the building’s location is required for correct details of the sun’s
position. If the location data is not correct, the shades will not be properly controlled.
The location settings can be accessed by pressing the buttons:
In the menu that appears, you can enter the location as a
city
or as
coordinates
(lon-
gitude and latitude).
Select
City
to make a selection under Country and City from a list using the buttons.
Select
Coordinates
to specify the location numerically. Press the minute and second
fields after one another for eastern longitude and northern latitude and set the values
with the arrow keys that appear.
Confirm your setting with the
OK
button.
Calibrate touch
If, when operating the touch display, you are forced to press “next to the button”,
please perform a calibration here. Press the buttons:
Sweden
+01:00
Switzerland
+01:00
Spain
+01:00
Country
UTC difference
WS1000
Settings
Location
System
Settings
City
Coordinates
WS1 / WS1000
Settings
Calibrate Touch
System
Settings
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
