124
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
8.3.
Parameter setting
Malfunctions and error messages
Malfunction/Defect of the KNX interface:
•
In the display unit of the
KNX WS1000 Color
, the message "KNX interface
defect" is displayed instead of the weather animation.
•
No communication with the bus takes place.
•
If it is configured in the ETS that the weather data needs to be received from
the bus, a wind or rain alarm is triggered to the controller.
Malfunction/Defect of the controller KNX WS1000 Color
(KNX interface does
not receive any message from the controller for 30 seconds):
•
A fault warning is transmitted to the bus.
Malfunction/Defect of a
KNX sensor or actuator
that has already been config-
ured
(no data reception):
•
In the manual menu of the
KNX WS1000 Color
, the message "No measured
values received" or "Position unknown" or "Defect" is displayed for the bus
subscriber.
253
Block 1_17: Temperature
Input
9,001
C W T
253
Block 1_17: 2 byte floating point
Input
9.*
C W T
253
Block 1_17: 4 byte floating point
Input
14.*
C W T
No.
Name
Function
DPT
Flags
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
