74
Installation
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Connect drives and devices to the control via KNX
8. Basic setting in the ETS
Connecting drives and devices wirelessly
Connecting drives and devices wirelessly is achieved by means of an Elsner wireless
modules (RF relay, RR-MSG). Elsner Elektronik ventilation devices can be learned into
the control system without any additional equipment. Please observe the installation
instructions relating to the wireless relays, motor control devices and ventilation devic-
es.
6.1. Wireless connections
Planning of drive groups
Each drive and each device that must be controlled individually requires a group of its
own (e. g. shades with different orientations to east, south, west). It is not possible to
individually control drives that are connected in a group.
Take special care to blinds in front of doors or awnings in front of windows. Combina-
tion rules for two drives like „only open window when awning retracted“ are not pos-
sible.
When motors are connected in parallel at RF-MSGs, take note of whether a group con-
trol relay is prescribed by the manufacturer. Group control relays can be obtained from
Elsner Elektronik or the motor manufacturer. Only drives with the same function (only
windows, only awnings, only blinds, only shutters) can be brought together in groups.
If motors are connected in parallel which are unsuitable for this
purpose, both they and the control unit will be damaged.
For D.C. drives we offer appropriate power supply units. In case of need we ask for de-
tails of the motor type, the manufacturer and – if available – the technical data.
Tips on connecting windows
With windows the supply of fresh air can be very well regulated using the Step window
configuration. In this, the control unit checks the room temperature every 3 minutes. If
the temperature is close to the reference value, the window will be opened or closed
step by step. You can adjust the number of steps in the Automation menu (“Number
of steps” button).
For sliding roofs, during normal operation of ventilators, it is not necessary to use the
full stroke. For that reason you can adjust the size of the opening in the Automatic
menu (“Movement position” button). If the sliding roof should be opened fully, this
can take place manually.
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
