82
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Name
Press the button to change the name. Enter the desired name via the keypad that ap-
pears.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
Drive groups
Press the button to assign the internal buttons to drive groups or devices. All connect-
ed drives and devices appear. You can select several buttons. Confirm your selection
with the
OK
button.
Only drives/devices with the same functions should be operated
together with a single button (e.g. only blinds or only windows).
6.2.2. Wireless connections
Devices that communicate wirelessly with the control unit must first be learned by the
control unit.
When learning wireless connections, always comply with the data sheet of the relevant
wireless device. The instructions for learning WGTH-UP indoor sensors can be found
in the Chapter
Setting up a wireless connection using WGTH-UP
.
WARNING!
Electric voltage!
Some devices have programming keys for learning the radio connection
inside their housings. and thus beneath unprotected live parts.
•This devices should only be learned by a trained electrician
(according to VDE).
This menu allows you to learn, control and delete radio connections. Press the buttons:
Group Button 1
Assign
Installation
Radio Connection
System
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
