97
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Press the button to start the slideshow. The images are displayed in the same se-
quence as they were saved onto the card (see note below). The image changes approx.
every 45 seconds (for images with 24-bit color intensity).
To return to the weather data display, touch the screen or remove the SD card (briefly
press down on the card so that it pops out).
Press the button if you wish to show an individual image on the display. All images
saved on the card will be displayed. Select the desired picture.
To return to the weather data display, touch the screen or remove the SD card (briefly
press down on the card so that it pops out).
Note:
The sequence of the catalogue of individual images and of the slideshow corre-
sponds to the sequence in which the images were saved onto the card. The images are
not sorted according to name.
Saving and loading configuration data
The SD card can be used as a storage and transfer medium for set-up data to:
•
Save personal settings
•
Store summer and winter configurations on two SD cards
Press the button to transfer the settings data from the SD card to the control system.
All configuration data stored in the card's root directory will be displayed. Select the
desired file. The data will be uploaded and the control system restarted.
Press the button to save the control system settings data onto the SD card. Enter the
desired file name using the keyboard that appears (max. 7 characters). Confirm by
pressing the
OK
button to save the information.
2.4. Input keyboard for names and codes
Slideshow
Image
Load Config.
Save Config.
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
