92
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
If the automatic function is off, the screen brightness can be set in percent. For this
press the
% value
. Using the arrow keys that appear you can adjust the value. Default
setting: On.
Using the
automatic switch-off
, you can determine whether the display lighting
should be switched off. Press the button
Off / When ambience dim / On
until the de-
sired setting is visible. Pre-set: Off.
If the automatic switcht-off is set to
On
, the display lighting will be turned off if no com-
mand is given for 5 minutes. If the screen is touched, it re-activates.
If the automatic switch-off is set to
When ambience dim
, then the display lighting will
switch off if the room is dark. If the room is lit, the display lighting will automatically
re-activate. If the screen is touched, it also re-activates. If no command is given for
around 1 minute, the automatic switch-off darkens the screen again.
Confirm your setting with the
OK
button.
Select time zone
In order to display date and time correctly, the time zone (relating to GMT) must be
specified here. In addition the automatic switch-over to summer time can be set.
You can reach the time zone settings by pressing the buttons:
The
time zone
can be set by pressing the arrow keys in the menu that appears.
Examples for UTC difference:
Country
UTC difference
Belgium
+01:00
Germany
+01:00
France
+01:00
United Kingdom
+01:00
Ireland
+01:00
Italy
+01:00
Croatia
+01:00
Luxembourg
+01:00
Netherlands
+01:00
Norway
+01:00
Austria
+01:00
Poland
+01:00
Portugal
+01:00
WS1000
Settings
Time zone
System
Settings
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
