95
Basic Setting WS1000
Control System KNX WS1000 Color
• Status: 18.04.2016 • Errors excepted. Subject to technical changes.
Internal area
In the internal area, basic data of the device can be modified. You are not authorised
to change this.
6.3.3. Access code
In the
System > WS1000 Settings > Access code
menu area you can set an access
code which locks the “Installation” and “Automatic Settings” menus against unau-
thorised changes. Manual operation of the control system remains possible at any
time.
The access code settings can be accessed by pressing the buttons:
Here you can enter, change and delete a code.
Press the button to set a new code. Enter the desired access code via the keyboard that
appears. The code will be shown in plain form.
2.4. Input keyboard for names and codes
Confirm your setting with the
OK
button.
The control system will now ask for this code before the menus are shown.
Press the button to change an existing code. First of all enter the existing access code
via the keyboard that appears. The code will be shown in plain form.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
Now enter the new access code via the keyboard.
Confirm your setting with the
OK
button.
The control system will now ask for this code before the menus are shown.
Press the button to delete an existing code, e.g. if you have forgotten the combination
or do not want it to be locked any more. Enter the active code or the unlocking code
“123” via the keyboard that appears.
WS1000
Settings
Access Code
System
Enter Code
Change Code
Delete Code
Summary of Contents for 70191
Page 6: ...5 Clarification of signs...
