94
MP500/4N-8-16 Programming
5.14.8
How to examine the fault and anomaly memory
A fault, failure or anomaly (e.g. low or inefficient battery, telephone line fault, detector or siren fault) will be indicated by the specific LED
on the keypad and the reader LED (see chapter
).
To examine the detected faults:
1) Enter
<Master / User / Installer / Technical Manager code>
, press
twice.
2) Press
. The fault LED will blink.
3) Use
and
to scroll the list of detected faults and anomalies.
4) Press
repeatedly to exit from the menu after examining the list.
5.14.9
How to delete the fault memory
The fault memory deletion procedure is selective, i.e. depends on the entered access code because different codes have different
resetting possibilities (Installer and Technical Manager can delete all memories, Master and User can only delete some memories).
How to delete the fault memory:
1) Enter
<Master / User / Installer / Technical Manager code>
, press
twice.
2) Press
. The fault LED will blink.
3) Use
and
to scroll the list of faults.
4) The following after examining the list:
5) Press
to delete the Tampers Memory.
6) Press
repeatedly to exit from the menu after examining the list.
UT02:...
FAULT
LOW BATTERY
CONTROL PANEL
MP500/16
12/01/2014 10:10
UT02:...
FAULT
LOW BATTERY
CONTROL PANEL
FAILURE
DELETE MEMORY?
MP500/16
12/01/2014 10:10
Summary of Contents for MP500/16
Page 139: ...MP500 4N 8 16 Programming 139 ...
