Elkron MP500/16, Programming Manual

Page: 110 / 140

110 MP500/4N-8-16 Programming
7.3.16
Valid code entered by user on keypad event
This is generated
when...

A valid access code is entered.
It is stored...

In the Event Log and the Diagnose Log.
7.3.17
Edit date-time on keypad event
This is generated
when...

The date and time is edited.
It is stored...

In the Event Log and the Diagnose Log.
7.3.18
User code enable/disable event
This is generated
when...

An access code is enabled or disabled.
It is stored...

In the Event Log and the Diagnose Log.
7.3.19
Key enable/disable event
This is generated
when...

An electronic or proximity key is enabled or disabled.
It is stored...

In the Event Log and the Diagnose Log.
7.3.20
Key acquisition/deletion event
This is generated
when...

An electronic or proximity key is acquired or deleted.
It is stored...

In the Event Log and the Diagnose Log.
7.3.21
Timed programmer warning event
This is generated
when...

The timed programmer will arm the partitions soon.
It activates...

The programmed PO warning outputs (only if the control concerns the partition status).

The enabled and associated keypads (buzzer).
It is indicated...

On Timed programmer LED (only if the command concerns partition status).
7.3.22
Arming block event
This is generated
when...

Arming is blocked, e.g. because inputs are open.
It is stored...

In the Event Log and the Diagnose Log.
7.3.23
Arming not executed event
This is generated
when...

If one or more partitions are not armed because of severe system anomalies.
It activates...

The dialler to send the incomplete partition arming message in form of numeric code (if programmed).
It is stored...

In the Event Log and the Diagnose Log.
7.4 DESCRIPTION OF ACOUSTIC INDICATIONS
If appropriately programmed, the keypads can emit auditory indications following given events.
7.4.1
Entry/exit time indication
This is generated
when...

One or more partitions associated to the keypads on which this function is enabled are armed (exit time).

One or more areas with one or more associated partitions with this function enabled are armed (exit time).

An input is opened (e.g. a customised first entry input) (entry time).
It lasts...

For the partition entry/exit time or the delayed input delay time.
It is activated on...

Enabled and associated keypads.

The programmed buzzer outputs which have at least one partition in common with the arming input.
IMPORTANT! The entry/exit acoustic indication function is activated and configured to comply with EN50131 by default on
control panels. Changing this mandatory configuration will cancel EN50131 compliance of the system.