Elkron MP500/16, Programming Manual

Page: 65 / 140

MP500/4N-8-16 Programming 65
4.18.13.1
Programming procedure
Proceed as follows to program the Answer Machine function:
1) Enter <Installer code> , press , then and finally repeatedly until TELEPHONE DIALER
appears.
2) Press and then several times until ADVANCED appears.
3) Press .
4) Press .
5) Press . Press and to select whether to deactivate the Answer Machine function for the
PSTN line or whether to answer incoming calls after 2, 4 or 8 rings (2 RING, 4 RING or 8 RING).
Press to confirm.
6) Press .
7) Press . Press and to select whether to disable or enable the Answer Machine function
for the GSM network. Press to confirm.
8) Press repeatedly to exit from the menu.
4.18.14
Rem.Ctrl Code
The control panel must communicate the remote control code supplied by the alarm receiving centre in order to connect to the centre.
The remote control code function is used to store the code on the control panel.
4.18.14.1
Programming procedure
Proceed as follows to program the remote control code:
1) Enter <Installer code> , press , then and finally repeatedly until TELEPHONE DIALER
appears.
2) Press and then several times until ADVANCED appears.
3) Press .
4) Press .
5) Press . Enter the remote control code on the keypad and press . Press to delete.
Press to confirm the entered code.
6) Press repeatedly to exit from the menu.
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
ADVANCED
ADVANCED
ANSWER MACHINE
ANSWER MACHINE
PSTN
PSTN
DISABLED
ANSWER MACHINE
GSM
GSM
ENABLE
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
ADVANCED
ADVANCED
ANSWER MACHINE
ADVANCED
REM.CTRL CODE
REM.CTRL CODE
66666666