8
MP500/4N-8-16 Programming
INTRODUCTION
ORGANISATION OF THE MANUAL
The manual is divided into chapters and the various topics are arranged in sequence to provide step-by-step instructions for
programming
and
configuring
the system.
Information for system
design, installation
and
maintenance
are contained in the
Installation Manual.
The Installation Manual also contains the
device acquisition procedure.
Instructions for system use by the end user are contained in the
User Manual.
CONVENTIONS USED
The following conventions are used in the manual for the sake of simplicity:
This is the LCD with the displayed message.
Unless otherwise specified, the same message is shown on the touchscreen keypad.
,
,
,
,
…
This is the equivalent key to be pressed on the keypad.
<Master code>
<User code>
<Installer code>
<Technical Manager code>
This indicates the code to be entered using the keypad.
<Master / User code>
This means that either code may be entered on the keypad indifferently.
H24
This means that the described function or service is always active.
Pay attention to the following symbols:
This symbol indicates an important warning.
This symbol indicates advice.
This symbol indicates EN50131 grade 3 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and of the
enabled functions.
This symbol indicates EN50131 grade 2 compliance.
The compliance of the system as a whole is equal to the minimum certification of the installed devices and of the
enabled functions.
This symbol indicates that EN50131 compliance may depend on other functions enabled in the system.
The symbol means that the function or device is not EN50131 certified.
This symbol means that the function or device will cancel EN50131 certification.
Summary of Contents for MP500/16
Page 139: ...MP500 4N 8 16 Programming 139 ...
