62/76
MP120
3.11 KEYS
Warning!
To be able to use the DK20 electronic keys, at least one DK2000M inserter (or one DK3000M
inserter, for transponder keys DK30) shall be available in the system.
3.11.1 PROGRAMMING NEW KEYS
Prior to using an electronic key or transponder key, the latter shall be acquired, i.e. a unique code shall, if
necessary, be generated and stored in the control unit memory.
To acquire a new key, proceed as follows:
1. type in the Master code or the Installer code, then press
ENTER
twice.
2. The following message will appear on the display:
Use button ▼ to select the following menu:
Then press
ENTER
to confirm.
3. The following message will appear on the display:
Press
ENTER
to confirm.
4. The following message will appear on the display:
and the red LED for all the available inserters will blink slowly.
I n s e r t K e y
R e a d N e w K e y
K e y P r o g r a m m i n g
E v e n t M e m o r y
